News center

Hollow anchor bars are one of the most practical support elements in tunnel construction. They combine drilling, grouting, and anchoring in a single steel element, making them suitable for fractured rock, squeezing ground, and locations where installing a casing would be difficult or slow. That integration is also what makes them sensitive to detail. A small deviation in water-cement ratio, hole alignment, grout volume, or thread condition can turn a designed support element into a weak point.

Mining engineers do not choose self-drilling rock bolts because they are new or because they are marketed as a universal solution. They choose self-drilling anchor rock bolts when the ground, the support cycle or the access conditions make a conventional drill-then-insert sequence difficult to control.A self-drilling anchor rock bolt is a hollow threaded bar that acts as part of the drill string, provides the injection path, and remains in the hole as reinforcement. In supplier literature, the same product family may be called a self-drilling hollow bar or an SDA bolt. A sacrificial drill bit is fitted to the leading end. The bar is advanced with the bit, grout or resin is delivered through the hollow core where the system is designed for that method, and the bar stays in place as the load-bearing element. This can create a more continuous drilling, anchoring and, where specified, grouting sequence rather than three separate operations.

A mine or tunnel contractor may decide to standardize on a mechanized bolting system for sound reasons: fewer consumable variants, more consistent installation, and a simpler procurement process. But a supplier's statement that a bolt or resin is "compatible" with a bolting rig is not a specification. It is a conclusion that should follow a line-by-line review of the rig, the bolt, the resin, the injection path, the control system and the site conditions.This article is a buyer's checklist. It does not confirm that any particular CQ Rockbolt product is compatible with a named rig. It shows what to send, what to ask, and what evidence should be in the answer before a trial or fleet-wide standardization.

A tender line item that says “resin rock bolts” can return three quotations describing three different systems: pre-packaged resin cartridges, a pumpable two-component resin, or a self-drilling hollow-core bar. The prices are not comparable, because the products do not do the same job in the same way.

Underground development is planned as a series of phases: a heading is excavated, support is installed, ventilation and services are extended, and the next work area is prepared. Rock bolt supply has to follow that sequence. A technically suitable bolt can still create problems if it arrives for the wrong work front, with the wrong plate, without the approved drawing revision, or in packaging that cannot be handled safely at the mine.That is why rock bolt delivery readiness is more than a dispatch date. For contractors working on African underground projects, the practical question is: can the supplier show that each delivery will match the approved support package, the installation method and the phase schedule?In this article, phase-based supply means releasing quantities against defined work fronts and approved technical packages, rather than relying on one annual blanket order. The approach still uses normal purchase orders and call-offs; it simply makes the link between the construction phase, the approved product and the delivery date visible.

An underground rock bolt RFQ may call for “expansion bolts.” One supplier may quote an expansion shell. Another may quote a sleeve. A third may quote a complete assembly with a bar, plate and nut.These responses can all look responsive, yet price different scopes. Before comparing unit price or delivery, the buyer needs to establish what each term means in that supplier’s offer and what will actually be supplied.This guide separates the terms commonly used for mechanical ground support and shows what to request in a quotation. It is a procurement guide, not a substitute for the project engineer’s selection, installation specification or acceptance criteria.

Two rock bolt quotations can show a similar length and quantity but represent very different installation requirements. One offer may cover slotted-tube bolts driven into drilled holes. Another may cover folded steel-tube bolts that require water inflation. The difference affects more than the bolt price: it changes the equipment review, borehole checks and evidence needed before purchase.For mine engineers, tunneling contractors and technical buyers, the useful question is not simply, “Which bolt is better?” It is: which proposed product meets the approved support requirements, works with the intended installation arrangement and comes with a clearly defined supply scope?CQ Rockbolt’s catalogue includes both split set friction rock bolts and water-inflatable expandable rock bolts. This comparison explains five checks to make before requesting o

A failed rock bolt is often described in one sentence: the bolt broke, pulled out, or came loose. That description records an outcome, but it does not explain the problem.The location of the failure is more useful. Did the steel rupture in the bar body, at the thread, inside a coupler, behind the plate, at the resin–rock interface, or in the rock mass itself? Did the bolt survive the ground movement but lose surface restraint when the plate punched into weak rock? Did a delayed fracture begin at a corroded pit far from the collar?Those are different load-path events. They point to different parts of the support system and require different evidence before anyone can decide whether the cause was material, design, installation, environment, loading, or a combination.This article explains how mining and tunneling teams can read failure location in underground support. It is written for rock-mechanics and geotechnical engineers, contractors, supervisors, quality personnel, and technical buyers who need to turn a failed bolt into useful engineering information rather than an immediate argument about product quality.

A resin bolt can pass every visual test at the collar and still fail to develop the anchorage expected by the design. The bolt may be in the hole, the plate may be tight, and resin may be visible at the surface. None of those observations proves that the resin filled the intended bond length, mixed properly, or formed a sound interface with the rock.