


Expandable bolt is use for controlling roof falling in fully mechanized working face, and also play a role in temporary support of sinking and drifting of coal mine,metallurgy, hydro power, railway, chemical industry, Shaft engineering, railway tunnel, rock chamber oil depot, hydropower engineering, civil defense engineering.
The hydraulic expansion anchor rod, also known as an expandable bolt, is a full-length anchoring product that achieves anchorage through water-injection expansion. It is suitable for roof fall control at fully mechanized coal mining faces and can also be used for temporary support during shaft and roadway excavation in coal mining, metallurgy, hydropower, railway, chemical, and other industries, as well as in railway tunnels, rock-cavern oil storage facilities, hydropower projects, and civil air defense projects. The product is available in three models—Pm12, Pm16, and Pm24—and can bear load immediately after installation. A single anchor rod can be installed in less than ten seconds.



The hydraulic expansion anchor rod is anchored through water-injection expansion. High-pressure water acts through the tube wall on the borehole, causing the rock mass to deform. The metal tube wall undergoes plastic deformation and embeds into the rock mass. The anchor rod can bear load immediately after installation and offers high load-bearing capacity.
As a full-length anchoring bolt, the hydraulic expansion anchor rod uses advanced technology to improve the mechanical properties of the anchor, simplify the installation process, and enhance anchoring quality. In roadway excavation under strong blasting vibration, high ground pressure, and large surrounding-rock deformation, it can more effectively control surrounding-rock deformation and maintain roadway stability.
The product is easy to operate, requires less than ten seconds to install a single anchor rod, and causes no environmental pollution. It is an ideal anchoring product.
| Item | Specification |
|---|---|
| Product name | Hydraulic Expansion Anchor Rod (Expandable Bolt) |
| Models | Pm12, Pm16, Pm24 |
| Anchoring method | Water-injection expansion, full-length anchoring |
| Material | S355MC |
| Applications | Fully mechanized coal mining faces; shaft and roadway excavation in coal mining, metallurgy, hydropower, railway, and chemical industries; tunnels; rock-cavern oil storage; civil air defense projects; etc. |
Model and Performance Parameters
| Item | Unit | Pm12 | Pm16 | Pm24 |
|---|---|---|---|---|
| Yield load | kN | ≥100 | ≥130 | ≥200 |
| Breaking load | kN | ≥110 | ≥160 | ≥240 |
| Elongation | % | ≥10 | ≥10 | ≥10 |
| Expansion pressure (water-injection pressure) | bar | 300 | 240 | 300 |
| Outer diameter (Ω-shaped profile) | mm | 28 | 38 | 38 |
| Outer diameter (tube body) | mm | 41 | 54 | 54 |
| Wall thickness | mm | 2 | 2 | 3 |
| Bushing head diameter | mm | 30/36 | 41/48 | 41/48 |
| Upper bushing diameter | mm | 28 | 38 | 38 |
| Required borehole diameter | mm | 32-39 | 43-52 | 43-52 |
| Optimal borehole diameter | mm | 35-38 | 45-51 | 45-51 |
At fully mechanized coal mining faces and in shaft and roadway excavation requiring temporary support, the hydraulic expansion anchor rod forms full-length anchorage through water-injection expansion and can bear load immediately after installation. It is suitable for conditions that require rapid support capacity.
For roadways with strong blasting vibration, high ground pressure, and large surrounding-rock deformation, the hydraulic expansion anchor rod can more effectively control surrounding-rock deformation and maintain roadway stability. The three models—Pm12, Pm16, and Pm24—cover a range of tube and borehole specifications for selection according to specific conditions.
The product is simple to install, requires less than ten seconds per anchor rod, and is economical and environmentally friendly. It is suitable for projects with requirements for construction efficiency and on-site environmental impact.
How does the hydraulic expansion anchor rod work?
The anchor rod is anchored through water-injection expansion. High-pressure water acts through the tube wall on the borehole, causing the metal tube wall to undergo plastic deformation and embed into the rock mass, forming full-length anchorage. It can bear load immediately after installation and offers high load-bearing capacity.
What models are available, and what borehole diameters do they fit?
The product is available in Pm12, Pm16, and Pm24. Pm12 requires a borehole diameter of 32-39 mm, with an optimal diameter of 35-38 mm. Pm16 and Pm24 require a borehole diameter of 43-52 mm, with an optimal diameter of 45-51 mm.
How long does installation take?
A single anchor rod can be installed in less than ten seconds. The simple operation makes it suitable for excavation faces that require rapid temporary support.
What are the main applications?
It is suitable for roof fall control at fully mechanized coal mining faces and can also be used for temporary support during shaft and roadway excavation in coal mining, metallurgy, hydropower, railway, chemical, and other industries, as well as in railway tunnels, rock-cavern oil storage facilities, hydropower projects, and civil air defense projects.
What is the expansion pressure of each model?
The expansion pressure is 300 bar for Pm12, 240 bar for Pm16, and 300 bar for Pm24. During installation, water injection expands the anchor rod, which can then bear load immediately.
Can it be used in roadways with high ground pressure and large deformation?
The hydraulic expansion anchor rod is particularly suitable for roadway excavation under strong blasting vibration, high ground pressure, and large surrounding-rock deformation. It can more effectively control surrounding-rock deformation and maintain roadway stability. The specific model should still be determined according to surrounding-rock conditions, borehole conditions, and the support design.
How soon can it bear load after installation?
The hydraulic expansion anchor rod can bear load immediately after installation. It offers high load-bearing capacity and is suitable for conditions that require immediate support.

The selection of a hydraulic expansion anchor rod should be based on the working-face type, surrounding-rock conditions, borehole diameter, and installation method. Pm12 is suitable for 32-39 mm boreholes, with an optimal borehole diameter of 35-38 mm. Pm16 and Pm24 are suitable for 43-52 mm boreholes, with an optimal borehole diameter of 45-51 mm. The models differ in tube diameter, wall thickness, bushing dimensions, and load parameters, and should be matched to the support design.
When requesting a quotation, please provide the following information:



Get in touch for more information, pricing, or custom requirements.